TiO₂ semiconductor material is commonly used as a working electrode in a dye-sensitized solar cell (DSSC). There are two types of TiO₂ used, namely the form of nanopowder and transparent paste. In this study, the fabrication of DSSC has been successfully carried out using TiO₂ with a transparent type of paste. DSSC fabrication was carried out by placing transparent TiO₂ paste 18 NR-T using 3 variations of holding time in the heating process using furnace Carbolite 1100. Variations of holding time used were 10 minutes, 20 minutes and 30 minutes at 500 °C. Natural dye that is used comes from kale, hibiscus, and pumpkin. For DSSC characterization, I-V test was done using Keithley 2620A and absorbance test using UV-Vis Spectrophotometer Lambda 25. The results of the characterization obtained the highest efficiency in water spinach at 5.5x10^-2. While the absorbance test obtained absorption peaks in the wavelength range for each watercolor dye 400-440 nm and 640-680 nm. Dye hibiscus has an absorption peak in the wavelength range of 460-560 nm. And in pumpkin dye has an absorption peak in the wavelength range of 440-460 nm.